Talon GX 150 IIR help with wiring

[Kr8zyboy]

I need help I'm trying to find out where the wires go that come from the key switch to the motor. I have put a new gy6 motor to replace the old gy6 but the new one has wiring from a scooter I have got the motor plugs all hooked up but need help making the key work.

[BlackScorpion]

I need help I'm trying to find out where the wires go that come from the key switch to the motor. I have put a new gy6 motor to replace the old gy6 but the new one has wiring from a scooter I have got the motor plugs all hooked up but need help making the key work.

cr8zyboy, welcome to , what scooter did the motor come off of? You can try this LINK or go to my site (see sig below) I might have other useful & helpful links.

[Kr8zyboy]

I bought the motor off eBay. It's a new motor that came with all the electronics and when I looked at the electronics I ordered a harness that fit the electronics and the harness is for a scooter. I just need help with a diagram to wire the keyed ignition. They said the cart is made by Carter brothers. On the key cylinder it says TKM and there's 5-6 wires and im not sure what they go to.

[BlackScorpion]

I bought the motor off eBay. It's a new motor that came with all the electronics and when I looked at the electronics I ordered a harness that fit the electronics and the harness is for a scooter. I just need help with a diagram to wire the keyed ignition. They said the cart is made by Carter brothers. On the key cylinder it says TKM and there's 5-6 wires and im not sure what they go to.

I had an issue with my Carter XTV, i do believe i have pictures of the ignition switch & wiring on my site. Does the back of the switch look like this?

[Kr8zyboy]

the ignition still wont work but if i use a push button switch to the relay it will crank but i am not getting any spark?

[BlackScorpion]

the ignition still wont work but if i use a push button switch to the relay it will crank but i am not getting any spark?

if I remember right the heavy red is power in, black is ground, red/white is power out to the cdi, and the green/yellow is start. Can you post a picture of the switch your using?

[Kr8zyboy]

[img][img]http://img441.imageshack.us/img441/5249/gocart3.th.jpg[/img][/img]
[img][img]http://img228.imageshack.us/img228/1465/gocart2.th.jpg[/img][/img]

[Kr8zyboy]

the key wont work but if i use a push button to the relay it will crank but i have no spark?

This is what the ignition looks like.


And this is what the plug looks like

[BlackScorpion]

see how i have the back of the ignition switch photographed?



Can you do the same for yours?

Don't know if this helps, but this where everything gets connected



You can also checkout this page: Chinese Engine Manuals - Wiring

[Kr8zyboy]

Thanks for all your help we had a bad key ignition I guess. we put in a new ignition and a kill switch and it fired right up .

[BlackScorpion]

Excellent!! Now get some videos of your and your go-kart and post them up.